CM-42 Technical Description
PAGE 22 OF 38
SEM/CX-02:0076/DES A
Group
Pin No
Name
Application Requirements
App I/O
19
PCMDLD
Logic input from phone module.
I
20
PCMULD
Logic output to phone module.
O
18
PCMSYNC
Logic input from phone module.
I
PCM
17
PCMCLK
Logic input from phone module.
I
9
AGND
Analog reference. This signal is an analog
reference output by the phone module. This signal
is connected to GND in one place in the phone
module. Under no circumstances shall it be
connected to any ground or be used as ground in
the application.
See 2.4 for more detailed information.
I
10
ATMS
Single ended audio output to phone module.
O
Analog
Audio
7
AFMS
Single ended audio input from phone module.
I
12
MODULE_PWR_
EN_B
Logic open collector output that is set low by the
application to enable power to the phone module.
The pull-up resistor resides in the phone module.
OOC
2
VREF
Phone module logic voltage sense input to
application. This signal provides the application
with the logic system voltage level used by the
phone module.
I
40
RI
This signal is used to indicate to the application of
an incoming call (voice, data, etc.). A falling edge
indicates incoming call. The signal remains low for
one second, then high for three seconds. This is
repeated until call is answered or dropped.
I
24
RINGER
Pulse Modulated logic input from phone module.
The application must provide power amplification if
the current draw is expected to exceed 1mA.
I
Status
15
HW_SD
Bi-directional signal, default set to be an open
collector output from the application.
OOC
I
39
CFMS
No termination. Leave open.
I
37
CTMS
No termination. Leave open.
O
36
SCL_SPI_CLK
No termination. Leave open.
IOC
35
SDA_SPI_IN
No termination. Leave open.
IOC
38
SPI_OUT
No termination. Leave open.
O
4
IO_4_VRTC
No termination. Leave open.
I/O
3
IO_3
No termination. Leave open.
I/O
Unused
1
IO_1_TIMEMARK No termination. Leave open.
I/O
13
RESERVED
No termination. Leave open.
I
16
RESERVED
No termination. Leave open.
O
11
RESERVED
No termination. Leave open.
O
Reserved
14
RESERVED
No termination. Leave open.
I
Table 15: Pin Direction for General Purpose Signals