Sontex 26277017, Инструкция по эксплуатации

Страница: 17 / 66

17 Instruction for use | Supercal 5
Check the design data of the plants.

The electrical pulse valence and the flow sensor's installation location must correspond
to the datasheet's values; observe type plates!

The permissible ambient temperature for the calculator is 5 ... 55°C.

The installation and project planning regulations must be observed.

The readability of the calculator and all nameplates must be observed.
The complete heat meter consists of the following three subunits:

Flow sensor

Calculator Supercal 5

Temperature sensor (2- or 4-wire technology) with or without pockets
The pulse value of the calculator and the flow sensor as well as the resistance of the
temperature sensor and calculator must be matched to each other.
The Supercal 5 calculator offers the following mounting options:
4.6.2 Wall Mounting