SONOPLOT MICROPLOTTER Proto, Руководство пользователя

Страница: 24 / 67

Before you start the dispensing process, you will need to calibrate the cant (level) of the surface
to be dispensed onto. Place a treated glass microscope slide in an appropriate slot on the deck
(or platen) of the Microplotter system. If your deck does not support microscope slides, either
replace the deck with one that does or use a different substrate material.
After loading the slide, clip into place a new dispenser if one is not already in the system.
Connect its telephone wiring to the jack on the Z-axis.
As soon as the new dispenser’s wiring is connected, select Calibrate Dispenser from
SonoGuide’s main control interface. The software will then calibrate this dispenser, using a
window like the following:
20