SSW 2010
•
page 1
INTRODUCTION
•
UNPACKING
INTRODUCTION
The SSW 2010 is a stereo passive subwoofer with both direct (4 Ohm) and 70/100V input, and a pair of
highpass outputs for satellite speakers.
With 70V input, 3 different power taps are available: 7.5W, 15W and 30W. With 100V input,15W, 30W and
60W are available, by connecting to the respective input terminal. Selection between inputs (direct and
70/100V) is carried out with a slide switch.
Also provided is a mode switch which provides stereo mode operation and mono mode operation (in case
of 70/100V input). In mono mode, the subwoofers are connected in series while the highpass output is
available from the left channel only.
Connection to the subwoofer is via Euroblock terminals which greatly facilitates wiring.
UNPACKING
Cut open the tape and open the flaps. Remove the EPE buffer. Lift the unit out of the box and remove all
protective covers. Please ensure that the following are attached to the rear of the unit.
1. 2 x wall-mount brackets fitted to the rear plate
2. 3 x female headers of Euroblock terminals
Inspect the speaker for any sign of damage. Please retain all packing materials in case you have to transport
the unit in future.
