Sono Swiss SW150MOD Скачать руководство пользователя страница 24

Страница: 24 / 26

Maintenance

BA_Modulrange_SW60/100/200_Sonoswiss_E_06.2012

Maintenance

7.1

Maintenance and care

Pull out the mains plug before carrying out any maintenance
works!

The present unit is maintenance-free.

Check the casing and the mains cable for damage regularly in
order to prevent electrical accidents.

Check the ultrasonic tank for leaks:

Immediately separate the unit from the mains in case of visible
leaks in the ultrasonic tank, e.g.

•

if there are any inexplicable stains or residues of cleaning

liquid under or next to the unit

•

if there is a high loss of liquid from the filled unheated tank

which is not due to vaporization

Inform your supplier or the manufacturer of the unit on the leak and
the cleaning medium used. Return the unit to the manufacturer or

to your supplier for inspection and repair.

Check the ultrasonic tank regularly for residues, in particular on
the tank floor. Remove any residues.

Regularly check the ventilation slots on the side of the unit for dirt

particles.

If necessary remove any contaminations, possibly by means of a
vacuum cleaner to guarantee sufficient ventilation inside the unit.

Any residues of cleaning liquids can be removed depending on the
type of cleaning medium used. Wipe off the cleaning liquid with a
cloth.

ATTENTION

Electrical security

Check the ultrasonic
tank for leaks

Maintenance of the
ultrasonic tank

Ventilation slots on
the side

Maintenance of the
casing

Содержание SW150MOD



























Результаты поиска

Содержание SW150MOD

Отзывы:

Sono Swiss SW150MOD, Руководство по эксплуатации, Страница: 24 / 26

Результаты поиска

Содержание SW150MOD

Отзывы: