Ultrasonic cleaning process
© Sonoswiss AG
© Sonoswiss AG
BA_Modulrange_SW60/100/200_Sonoswiss_E_06.2012
17
5
Ultrasonic cleaning process
Please observe the following instructions before starting the ultrasonic
cleaning process.
Risk of scalding by hot surfaces and cleaning liquid!
Ultrasonic energy is physically transformed into heat.
The unit and the cleaning liquid in the tank heat up during
ultrasonic operation even with the heating switched off.
During permanent operation with cover temperatures
exceeding 60°C can be reached.
During permanent operation with cover and heating
temperatures exceeding 80°C can be reached.
Do not reach inside the bath.
If necessary touch unit and basket with protecting gloves!
Ultrasonic units can produce annoying sounds.
Wear personal ear protection devices when working close to
an ultrasonic unit which is operated without cover.
Sensitive surfaces may be adversely affected by ultrasound
during prolonged periods of ultrasonic treatment, in particular
at lower ultrasonic frequencies.
Ensure that sensitive surfaces are exposed to ultrasonic
activity for a suitable period only.
If in doubt check the cleaning progress regularly and observe
the state of the surface material.
Ultrasonic energy is physically transformed into heat.
The unit and the cleaning medium in the tank heat up during
ultrasonic operation even with the heating switched off.
During permanent operation with cover temperatures exceeding
60°C can be reached.
For the cleaning of temperature-sensitive items please take into
consideration the heating-up of the cleaning medium.
The operator is responsible for the inspection of the cleaning result
and for the continuous inspection of the cleaning items during ultrasonic
treatment to prevent damages from the cleaning items.
CAUTION
CAUTION
ATTENTION
CAUTION
