Section 5: OPERATION
Projector User Manual
5-7
• 4-Corner: Allow the image to be squeezed to fit an area defined by moving
each of the four corners’ x and y position.
PIP/PBP
• PIP/PBP
Enable:
Toggle
between displaying two sources at once (Main
and PIP/PBP images) or one source only.
• Main Source: From the list of active inputs, select one to be used as the
main image.
• Sub Source: From the list of active inputs, select one to be used as the PIP/
PBP.
• Swap: Change the main image to PIP/PBP, and the PIP/PBP to main
image. Swapping is available only when PIP/PBP is enabled.
• Size: Select the PIP/PBP size. Available options: Small, Medium, or Large.
• Main Layout: Set the location of the PIP/PBP image on the screen.
NOTE:
PIP/PBP layout and size table as described below.
P : indicates primary source region (lighter color).
* : Both source regions are the same size.
PIP/PBP Main Layout
PIP/PBP Size
Small
Medium
Large
PBP, Main Left
*
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
PIP-Bottom Right
A
A
B
B
B
B
A
A
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
*
*
*
*
