Section 5: OPERATION
Projector User Manual
5-3
Sharpness
Select the edge clarity of the image.
Color
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase
Analog signals only. Adjust pixel phase when the image still shows shimmer or
noise after pixel tracking is optimized. Pixel phase can adjust the phase of the
pixel-sampling clock relative to the incoming signal.
Frequency
Analog signals only. Steady flickering or several soft vertical stripes or bands
across the entire image indicates poor frequency. Proper frequency ensures
that the image quality is consistent across the screen, the aspect ratio is
maintained, and that the pixel phase can be optimized.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
3D Display
Select the 3D relating settings.
• 3D Enable: Set 3D format. Supports Mandatory 3D formats and frame
sequential 3D@120Hz.
• 3D Invert: Invert 3D sync signal for the application of using single projector.
• DLP Link: Select 3D Sync source:
-
On: 3D Sync type is DLP link.
-
Off: 3D Sync source is from the
3D SYNC OUT
port.