Section 5: OPERATION
Projector User Manual
5-4
HSG Adjustment
Configure the color management settings.
• HSG Enable: Enable/Disable the HSG adjustment function.
• Auto Test Pattern: Set to “On” to enable displaying a test pattern for the
target color or set to “Off” to disable the auto test pattern.
• Red H. / Green H. / Blue H. / Cyan H. / Magenta H. / Yellow H.: Adjust the
hue of the red, green, blue, cyan, magenta, or yellow channel of the image.
• Red S. / Green S./ Blue S. / Cyan S./ Magenta S./ Yellow S.: Adjust the
saturation of the red, green, blue, cyan, magenta, or yellow channel of the
image.
• Red G. / Green G. / Blue G. / Cyan G. / Magenta G. / Yellow G.: Adjust the
gain of the red, green, blue, cyan, magenta, or yellow channel of the image.
• White R Gain / White G Gain / White B Gain: Adjust the white balance of
the red, green, or blue channel of the image.
• Reset to Default: Reset the hue, saturation, gain, and white balance
adjustments to the factory defaults.
Advanced
• White Peaking: (Video source only) Increase the brightness of whites that
are near 100%.
• Gamma: Select the appropriate gamma from Video, Film, Bright, CRT,
DICOM, and Gamma 2.2.
• Color Temperature: Change the intensity of the colors.
• Color Space: Select a color space that has been specifically tuned for the
input signal. Use only for analog signals and certain digital sources.
• Color Settings: Adjust the gain of the red, green, or blue channel of the
image. It will affect the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
• Color Enhancement: Apply the color enhancement process.
• Color Wheel Speed: Higher speed will reduce the appearance of color
artifacts seen by some people.
• Film Mode: Control film mode detection and determine whether the original
source of the input video was film or video.
• Extreme Black: Analyze the current input image and calculate an offset
value which is then added to the analog to digital converter black level
value. This ensures optimum black level for each analog source.
• DynamicBlack™: Automatically adjust the contrast ratio for video contents.