Sonnenkonig KLIMA KING Plus, Руководство пользователя

Страница: 61 / 71

61
EN
5. INSTALLATION
POSITIONING THE AIR CONDITIONER
To maintain the best performance from your
air conditioner, prevent breakdowns or haz ards, you
must position it correctly. Please fol low the guide-
lines and instruction below in full, as failure to do so
could cause potential installation problems.
• The air conditioner must be installed on an exteri-
or wall that has access to the outside with a
minimum of 2 meters clearance to the outside.
• The air conditioner must be fitted leaving room
all around as illustrated in the paper tem plate
• The wall on which the air conditioner is installed
must be sturdy and able to withstand the weight
of the air conditioner.
After determining the best place for installa tion as
described above, please check to ensure that the wall
can be drilled in the cho sen area without interfering
with other struc tures or installations (beams, piers,
pipes, wires, etc.).
Please also ensure that there are no obstacles on the
outside of the wall, which may obstruct air circula-
tion through the drilled holes, for example: plants
and their leaves, slats or pan elling, drain pipes,
overflows and gratings, etc.). Any obstruction could
interfere with the correct performances of the air
conditioner.
PAPER TEMPLATE
Fasten the template to the wall once the fol lowing
guidelines have been thoroughly checked.
Do not drill any holes until you are com pletely confi-
dent that there are no obstacles in the area you wish
to drill and there are no obstructions, which could be
hidden by the construction of the wall, for example:
Electrical wiring water & gas pipes or support ing
lintels or beams.
Ensure that a spirit level is used, as the air conditio-
ner must be level.
Follow the installation instructions in full.
spirit level