34
IT
6 Funzionamento del telecomando
Per utilizzare il vostro ventilatore da soffitto col telecomando, puntate la trasmittente verso
il sensore del ventilatore. LUCE ON/OFF: Premere per accendere/spegnere le luci (sui mo-
delli presenti) VENTILAZIONE OFF: Premere per accebdere/spegnere il ventilatore
1: Premere per selezionare la rotazione delle pale a bassa velocità
2: Premere per selezionare la rotazione delle pale a media velocità
3: Premere per selezionare la rotazione delle pale ad alta velocità
Per sostituire le pile del telecomando (non fornite) far scorrere lo sportello di chiusura posto sul
telecomando stesso e rimpiazzare con 2 pile da 1.5V/modello AA (Fig. 3), avendo l’accortezza di
posizionare correttamente le polarità. Riposizionare il coperchio delle pile nella ap-posita sede.
Il porta telecomando, se si desidera, può essere fissato al muro con due viti.
Collegamento del ventilatore al ricevitore del telecomando�
- Il cavo bianco arrecante l‘etichetta “To fan neutral wire”(immagine 1, 1), deve essere col-
legato al morsetto (immagine 2, 2), dalla parte opposta del quale canale si trova l‘altro
cavo bianco. Il cavo che arreca l‘etichetta “Neutral wire” (immagine 1, 6) deve essere
invece connesso al circuito elettrico della casa.
- Il cavo nero (immagine 1, 3), arrecante l‘etichetta“To fan live wire”, deve essere collegato
al morsetto (immagine 2, 4) dalla parte opposta del quale canale si trova l‘altro cavo
nero. Il cavo (immagine 1, 7) arrecante l‘etichetta “Live wire”, va connesso con il circuito
elettrico della casa.
Immagine 1
immagine 2
I due cavi «To fan neutrale» e «To fan Live» possono avere bisogno di essere estesi alla base.