Sonnen sonnenBatterie 10, Руководство по установке, Страница: 19 / 100

Product description | 4
KD-557 | 1000241 | EN | 02 19 / 100
3 Safety label 4 Type label sonnenProtect 4000
4.3 Type plate
The type plate for the storage system is located on the power module and can be viewed
from the outside through the inspection window. The type plate can be used to uniquely
identify the power module and thus the storage system. The information on the type plate
is required for safe use and for service matters.
The following information is specified on the type plate:
• Item designation
• Item number
• Technical data of the storage system
The battery capacity and the nominal power of the storage system differ depending on the
number of battery modules installed. For this reason the installed battery capacity must be
ticked on the type plate by the electrician installing the system (see Filling out the type
plate [P. 76]).
4.4 Optional accessories
The following optional accessories can be added to the storage system in order to extend
its functionality:
Designation Description Item number
Accessories for extending the sonnenBatterie 10
Extension set Second mounting frame (incl. crossbars) with cover.
For installing up to six additional battery modules (see
Installing the extension cabinet (optional) [P. 49]). 4
3000082
sonnenProtect 4000 Backup box for power supply to defined backup cir-
cuits in the event that the public electricity grid fails
(see sonnenProtect 4000 (optional) [P. 64]). 3000083
Clamp-on current
transformer up to
400 A For measuring and recording amperages higher than
60 A. Available for maximum amperages up to 100 A,
200 A or 400 A. 11215, 11216, 11659
Additional sonnen products for extending storage system functionality
sonnenCharger Charging station for electric vehicles for intelligent
control by the storage system. Different versions
available