Sonnen sonnenBatterie 10, Руководство по установке, Страница: 64 / 100

9 | sonnenProtect 4000 (optional)
64 / 100 Installation instructions sonnenBatterie 10
9 sonnenProtect 4000 (optional)
• Both when the sonnenBatterie 10 is first being installed and after the fact, a
sonnenProtect (sonnenProtect 4000) can be added to the system.
„
Observe the Safety [P. 7] information for the storage system and sonnenProtect at all
times!
„
Observe the Storage and transport [P. 12] instructions for the storage system at all
times, as these also apply to the sonnenProtect.
Adding a sonnenProtect to the storage system allows the system, once in-
stalled, to be able to operate both with backup power and in an isolated net-
work. These are functionalities that must be specified when a storage system is
registered with a
DNO .
„
Check whether the storage system data needs to be changed with the
DNO or whether the system needs to be re-registered.
9.1 System components of the sonnenProtect
2
3
4
5
1
6
7
8
1 IN line from storage system 5 Cutout for cable duct
2 Signal line to storage system 6 Cutout for additional cable duct
3 OUT line to backup circuit 7 sonnenProtect
4 IN line from building distributor 8 Illuminated switch