B
A
A
A
D
Fig. 11
Fig. 12
C
Luminaire
Luminaire
Luminaire
C
July 7, 2020
©2020 SONNEMAN - A Way of Light
7 of 7
Luminaire Installation
(Fig. 11-12)
1. Designate the two connectors on each side of the Luminaire as
A
and
B
(Fig. 11). Leave
Connector A
fully installed to
mounting surface. Remove
Connector B
from its mounting bracket (C) by loosening set screws with included Allen key.
2. Angle the Luminaire into the ports on
Connector A
and
B
. Align
Connector B
with its mounting bracket.
3. Carefully pivot the Luminaire into both connector ports while moving
Connector B
onto its mounting bracket.
If necessary, adjust
Connector B
position to ensure Luminaire is fully inserted into both connector ports: loosen the toggle
anchor screw, adjust the bracket position, and retighten the toggle anchor screw.
4. Secure
Connector B
by tightening set screws with included Allen key.
Note:
For some configurations, two Luminaires may need to be installed simultaneously to a shared
Connector D
(Fig. 12).
Follow steps 1-4 above with
Connector D
in place of
Connector B
.
Note:
To remove Luminaire from Connector, gently tilt and pull Luminaire
to disengage Connector clips. Do not apply excessive force or damage to
the Luminaire and Connector may result.
Содержание purolinear 360
Страница 1: ...purolinear 360 assembly instructions...
