Place Sticker
Here
2’
4’
2’
2’
2’
2’
3’
4’
3’
PWR
FEED
PWR
FEED
2’
2’
4’
3’
4’
4’
12’ Linear Unbalanced
4’
8’
3’
3’
3’
6’
6’
12’ Linear Balanced
PWR
FEED
PWR
FEED
5. Balance the electrical load in a configuration by making the total Luminaire length in each branch as similar as possible. For
example, a 12ft linear configuration should be grouped in two 6ft sections, rather than a 4ft section and an 8ft section (Fig. 6).
6. Any Connector type may be used as a power feed.
Fig. 6
A
B
Fig. 5
4. Configurations that violate any of the prior requirements must be split into two or more electrically-isolated subsections,
each of which meets the requirements individually. Each subsection requires a separate power feed. See Fig. 4 for
an example configuration split into two subsections. Subsections are electrically isolated by applying the included
insulating stickers (A) to the Luminaire PCB (B) to block electrical contact between the appropriate Luminaires and
Connectors (Fig. 5).
Fig. 4
July 7, 2020
©2020 SONNEMAN - A Way of Light
4 of 7
System Layout Considerations (cont.)
Содержание purolinear 360
Страница 1: ...purolinear 360 assembly instructions...
