SONNEMAN purolinear 360 Скачать руководство пользователя страница 2

Страница: 2 / 8

July 7, 2020

1 of 7

Purolinear 360™ Product Information and Warnings

Important

• Always disconnect the power before installing or replacing Luminaires and before cleaning or

other maintenance.

• Consult a qualified, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualifié pour vous assurer que les conducteurs de la dérivation sont adéquats.

• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

CE PRODUIT DOIT ÊTRE INSTALLÉ CONFORMÉMENT AUX DISPOSITIONS APPLICABLES CODE D'INSTALLATION PAR UNE

PERSONNE FAMILIÈRE AVEC LA CONSTRUCTION ET LE FONCTIONNEMENT DU PRODUIT ET LES RISQUES.

• Suitable for Damp Locations.

Convient aux Emplacements Humides.

• Please read all included assembly instructions and warnings carefully before installation. Contact Customer

Service if you have any questions or concerns. Before installation, please confirm that the fixture is compatible

with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed

compartments, and avoid touching the LEDs with your hands or any object.

• Although all our fixtures are equipped with protective devices, LED electronic systems are vulnerable to power

surges and supply variations. Do not install LED fixtures on the same circuit as any motors, appliances, or HVAC

systems.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use the

appropriate hardware for the mounting surface.

Содержание purolinear 360








