Sonifex SOVEREIGN MX-14S, Руководство пользователя, Страница: 48 / 65

<PbcTa >dc_dc <^]Xc^a <^Sd[T ?PVT &"
C_fUbUYW^ EcUbc 7eYTU
&" BcdSX^ <^]Xc^a P]S ?W^]Tb BT[TRcX^]
This section of the module can be divided into three areas :
•
Studio Input Selection
•
Studio Monitor Selection
•
Studio Phones Selection
&" BcdSX^ 8]_dc BT[TRcX^]
Signals to be monitored by the studio monitors or
headphones are selected by using the buttons at the top of the panel. They can
be used to show any combination of the A output, the B output, the External
Input 1 or the External Input 2. When a red LED is illuminated, it indicates
that the signal is routed to the Studio module.
External Inputs are normally used for monitoring the off-air
signal or another studio.
&"! BcdSX^ <^]Xc^a BT[TRcX^]
Input to this section is derived from Studio Input Section at
the top of the panel.
The STUDIO MONITOR section will affect the output to
any amplifier connected to the 1/4” jack studio monitor socket. The output
must be amplified in order to drive studio speakers. The monitor level can be
adjusted by use of the level knob which alters the output between cut-off,
when set to 0, and unity gain 0dB, at 10.
With the AUTO PFL button depressed, the yellow LED
glows in the button and any channels set to PFL are automatically routed to
the studio monitors.
The Mute function operates, and the MUTE LED glows,
whenever a mic channel is used which has been designated to mute the studio
monitors ( See Section 2.3.8 ), i.e. a studio microphone. This is to prevent
feed-back. Two pairs of contacts on the Remote connector also close
whenever the Mute function operates, to control external equipment, or
lights.
&"" BcdSX^ ?W^]Tb BT[TRcX^]
Input to this section is derived from Studio Input Section at
the top of the panel.
The STUDIO PHONES section will affect the output to any
headphones connected to the 1/4” jack studio phones socket. The phones level
can be adjusted by use of the level knob which alters the output between cut-
off, when set to 0, and unity gain 0dB, at 10.
With the AUTO PFL button depressed, the yellow LED
glows in the button and any channels set to PFL are automatically routed to
the studio headphones, independently of the studio monitors.
The STUDIO T/B button allows the presenter in the
Control Room to transmit talkback to the Studio Monitors and Phones when
the button is depressed.