Sonifex SOVEREIGN MX-14S, Руководство пользователя, Страница: 38 / 65

CaP]b\XbbX^] A^dcTa <^Sd[T ?PVT $
C_fUbUYW^ EcUbc 7eYTU
$ CaP]b\XbbX^]A^dcTa<^Sd[T
$ ?P]T[ 2^]ca^[b
$ B^daRT BT[TRc 1dcc^]b
These five buttons control which signal is routed
through to the output. The top four buttons, TRX 1 - TRX 4, allow the
user to select one of four external sources. These sources are
connected on the rear of the module using the 25 pin D-Type
connector.
Selecting LOCAL will route to the output any desk
channels which are selected to output A.
Note that the master output must be taken from this
module instead of from the rear of the Output Module. The Master
Outputs A and B on the Output Module will still operate, but will not
transmit the external signals, only the local ones.
$ ! <TcTa BT[TRc
The Meter Select button determines what is shown
on the meters. With the button depressed and the LED illuminated,
the transmission from the external source can be displayed. When the
button is in the up position, the local output is shown at the meters -
this is the normal configuration when the external inputs are not
being used.