manualshive.com logo in svg

Sonifex RB-SD1IP, Руководство пользователя, Страница: 29 / 36

Поделиться
Скачать
Sonifex RB-SD1IP Скачать руководство пользователя страница 29

19

Network Discovery and Webserver       4       

Configuration : USB Settings

USB Audio

Enable or disable the use of USB Audio as a secondary back up source, to be 
switched in when both Main and Aux sources are silent.

Fig 4-10: RB-SD1IP Screenshot of the Webserver USB Page

Default Rate

We recommend that a USB device is loaded with 
files which are all in the same sample frequency 
range (e.g. 48 kHz, 24 kHz and 12 kHz), this will 
avoid any detection or playback delays between 
tracks as the internal clock is adjusted for different 
sample rates. 

This option allows you to select the sample rate 
range that you wish the unit to initialize with. The 
unit will still play files of any sample rate (8 - 48 
kHz) regardless of this setting. See handbook for 
more details regarding sample rates and delays.

Track Recall

Enabling this option prevents the unit from starting 
at the first track every time USB audio is switched 
in. The unit will recall the track that was previous 
playing, and play out the next available track.

Playback Mode

Choose to either loop the playback of the audio 
files on the USB device, or to only play through 
once.

Plugged / Unplugged Trap

Enable or disable the generation of an SNMP Trap 
when a USB device is plugged into or unplugged 
from the unit.

Note: 

The destinations for traps can be configured 

on the SNMP configuration page.

Содержание RB-SD1IP





































Отзывы:

Нет отзывов