manualshive.com logo in svg

Sonifex RB-SD1IP, Руководство пользователя, Страница: 2 / 36

Поделиться
Скачать
Sonifex RB-SD1IP Скачать руководство пользователя страница 2

RB-SD1IP Handbook

This handbook is for use with the following product: 

Redbox RB-SD1IP  Silence Detection Unit With Ethernet & USB 

Stock Code: 30-279

Revision 1.06, December 2015  

©Sonifex Ltd, 2015 

All Rights Reserved

Sonifex Ltd, 61, Station Road, Irthlingborough, 

Northants, NN9 5QE, England. 

Tel: +44 (0)1933 650 700 

Fax: +44 (0)1933 650 726 

Email: [email protected] 

Website: http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a 

commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage 

whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic 

or mechanical, including photocopying, recording, information storage and retrieval systems, for any 

purpose other than the purchaser’s personal use, without the express written permission of Sonifex 

Ltd. Unless otherwise noted, all names of companies, products and persons contained herein are 

part of a completely fictitious adaptation and are designed solely to document the use of Sonifex 

product.

Made in the UK by

Содержание RB-SD1IP





































Отзывы:

Нет отзывов