Sonifex Net-Log, Руководство пользователя, Страница: 52 / 66

10. Options
Control
This screen ( Figure 10.5 ) displays the currently selected
serial Control Interface. If any additional options exist for
an interface, these will be displayed when the relevant type
is selected. The current options are:
No Control/Interface Selected
The serial Control Interface is disabled.
Televic CE2500
The Serial Control Interface is configured for connection to
the Televic CE2500 Digital Conference and Interpretation
System. Additional options are displayed for configuring the
available record channels to be controlled by specific
microphones (see Figure 10.6 ).
AMX/Crestron
The Serial Control Interface is configured for connection to
an AMX/Crestron Control Panel. There are no additional
options for this interface type.
Information
This screen ( Figure 10.7 ) displays general information
about the Net-Log. The Network settings are the MAC
Address, IP Address, Subnet Mask and Default Gateway for
the connected Net-Log. The administrator can change all
these settings (except the MAC address) by selecting the
Network Settings menu in the administrator menu or by
using the Net-Log-Win serial utility, whereby the settings
are downloaded to the Net-Log via the serial port. The MAC
Address is also stored in the BWF header of an archive or
download file.
The Disk Drive Info shows the Model, Serial Number,
Firmware Revision and Capacity of the disk drive.
Saving and Loading Options
Once you have finished setting up the options, you can
make a copy of them on a PC. This can be particularly useful
if you have more than one Net-Log and you want each
machine to share a similar configuration.
To save the options for the connected Net-Log, select File,
Save As from the main menu. A dialog will be displayed
allowing you to specify the location and name of the file that
will be used to store the current configuration information.
Once you have made these selections, press Save.
To load a previously saved file, select File, Open and then
select the file that contains the required configuration
information.
Please note, you can only load and save options whilst in the
options screens.
Figure 10.5 Control Interface Options
Figure 10.6 Televic CE2500 Control Options
Figure 10.7 System Information
Sonifex Net-Log-Win User Handbook
34