Sonifex Net-Log, Руководство пользователя, Страница: 49 / 66

10. Options
O
PTIONS
10
Figure 10.1 Record Options
The Options screens are used for initially configuring the
Net-Log before recording. All of the options should be set
before Net-Log starts recording, as some of them can not
be altered once recording has started .
Record
This screen ( Figure 10.1 ) displays the current settings of
the two input channels, and also allows them to be changed.
Each input is independent of the other, although when they
are set-up for dual mono recording, the two mono channel
record settings cannot be configured individually.
Disable
Disables the channel.
Override Enabled
Enables this channel to be controlled by the Record Control
button on the front of the Net-Log.
Format
Selects the record format, either MPEG or G.729A. Any
existing tracks must be deleted from all channels before the
record format can be changed. To use the G.729A record
format, an additional license must be purchased from
Sonifex Ltd.
Mode
In Manual mode, recording is started and stopped via the
Record Start button in the record screen.
In Program mode recording is automatically started and
stopped according to the program for that particular
channel. Note: If the mode is set to Manual mode, the
Program record screen will not be available.
In Auto Start Mode, recording is started and stopped
automatically as the input audio level passes through
threshold level settings. Auto Start mode is not available for
channels configured to use the G.729A record format.
Channels
Channel format i.e. stereo, mono or dual mono. For G.729A
channels, only mono or dual mono configurations are
available.
Sample Rate & Bit Rate
Selects the recording parameters for that Input. These
settings are only relevant to MPEG configured channels.
When selecting the recording bit-rates for the two pairs of
channels, it is important to refer to the maximum number of
network connections in Chapter 3.
Start Level
Defines the auto recording start threshold level in dB. When
the input audio level rises above this value, recording
automatically starts.
Sonifex Net-Log User Handbook
31