2
2
Controls, Indicators and Connections
2
2
Controls, Indicators and Connections
2. Controls, Indicators, and
Connections
This sec�on contains informa�on about the interac�vity of the different
panels of the device, such as LED descrip�ons, func�ons and connector
pinouts.
Front Panel
Fig 2-1: AVN-AIO Front Panel
Fig 2-2: AVN-AIO Indicators and Reset
Towards the le�-hand side of the front panel are three status LED’s and a
reset bu�on.
PoE
The PoE status LED is illuminated when power over ethernet is available.
Because PoE is the only power supply source, this is essen�ally a power
LED.
Link
The link status LED is illuminated when the device is connected to a valid
network.
Clock
The clock status LED is illuminated when the device is a PTP master or
synced to a valid PTP master.
Reset
In the unlikely event that the unit fails to respond, press the reset bu�on to
reboot the unit. This does not remove the Dante Controller configured
se�ngs.
