1
Introduction
1
Safety & Installation
1
1. Introduction
These Dante® audio interfaces convert balanced analogue audio line inputs
and outputs to Dante AoIP. Simple to configure and operate, these cost-
effec�ve rack-mount solu�ons offer an easy solu�on for AV professionals
and system integrators.
• Provide 4 (AVN-AIO4) or 8 (AVN-AIO8) analogue audio inputs and 4
(AVN-AIO4) or 8 (AVN-AIO8) or 16 (AVN-AO16) analogue audio outputs
on Neutrik XLR connectors.
• Dante network connec�on for configura�on using Dante Controller.
• AES67 opera�on.
• Dante Domain Manager compliant.
• 1U 19” rack-mount form factor.
• Powered by PoE.
The sample rate can be configured between the following op�ons via
Dante Controller:
• 44.1kHz
• 48kHz
• 88.2kHz
• 96kHz
• 176.4kHz (Not Available On AVN-AIO4)
• 192kHz (Not Available On AVN-AIO4)
On the AVN-AIO4 when the sample rate is configured to be greater than
48kHz, only the first two inputs and outputs can be used.
Note: For the AVN-AIO4, for sample rates >48kHz, the unit can be
configured as a 4 input OR 4 output device by loading different firmware.
Contact [email protected] if you require this feature.
