Sonifex AVN-MPPR, Руководство пользователя

Страница: 43 / 48

35
Webpages & Local Display Settings (Technician Remote) 9
System Web Page
The system web page allows the user to update the firmware ; to save and
load complete configurations from saved files; and to save the system log to
a file for examination of fault and conditions. The new firmware will have to
be available on the connected PC. These files are downloadable from the
Sonifex website – www.sonifex.co.uk and will have an .swu suffix. The
upgrade will take around a minute to complete. If the upgrade fails, then
there is a fallback recovery system that is permanently available to the unit,
which will cause the unit to enter a default IP state which can be accessed
from a browser at a URL of http://192.168.0.100:8080 Again select the
.swu file and click the upgrade button.
The front panel has its own firmware, and this is embedded into the main
code above. If the unit starts up an recognises that the front panel code in
the firmware is a different version to that currently stored in the front panel
then the main board will perform an update on the front panel. It does this
by restarting the front panel in a bootstrap mode where the encoder knobs
1&2 and 3&4 will flash alternately and where the VM select buttons and
the display will show a progress bar for the update of around 30 seconds.
The front panel can be forced into bootstrap mode by holding down the
encoder knobs 1 & 3 during a power or reset cycle.