Sonifex AVN-MPPR, Руководство пользователя

Страница: 37 / 48

29
Webpages & Local Display Settings (Mix Engine) 7
System Web Page
The system web page allows the user to update
the firmware ; to save and load complete
configurations from saved files; and to save the
system log to a file for examination of fault and
conditions. The new firmware will have to be
available on the connected PC. These files are
downloadable from the Sonifex website –
www.sonifex.co.uk and will have an .swu suffix.
The upgrade will take around a minute to
complete. If the upgrade fails, then there is a
fallback recovery system that is permanently
available to the unit, which will cause the unit to
enter a default IP state which can be accessed
from a browser at a URL of http://
192.168.0.100:8080 Again select the .swu file and
click the upgrade button.
The front panel has its own firmware, and this is
embedded into the main code above. If the unit
starts up an recognises that the front panel code
in the firmware is a different version to that
currently stored in the front panel then the main
board will perform an update on the front panel.
It does this by restarting the front panel in a
bootstrap mode where the status LEDS 1&2 and
3&4 will flash alternately and where the display
will show a progress bar for the update of around
30 seconds. The front panel can be forced into
bootstrap mode by holding down the centre ok
button and the bottom arrow on the roundel
navigation control during a power or reset cycle.
Fig 7-17: System Web Page