54
6
Embedded Web Server
Adding an Input Group
By default, the commentator has the virtual inputs added to the routing
grid, these can’t be removed. The two commentator mics on the AVN-CU2-
DANTE and the four commentator mics on the AVN-CU4-DANTE are also
added by default and have fixed routings to the virtual outputs. Lastly a
tone generator is also added to the inputs section by default.
Additional digital, analogue, and Dante inputs can be added to the unit as
the user desires.
To add a new input group to the audio routing grid:
• Click the
+
button next to
INPUTS
, this will open a new window.
• Type in a name for the new input group, this name is displayed as the
label for the input on the inputs section of the grid.
• Select the input type, digital and analogue inputs are located on the rear
of the device whereas Dante inputs are accessible using Dante Controller.
• Select which of the available channels you would like to add to the
group. A maximum of 8 channels can be added to a group.
• Click the
Add
button, the input group will now appear in the inputs
section of the audio routing grid with the name provided.
Tips:
• A tooltip will be displayed if there are any issues with adding the input.
• The shift button
and control button
can be used to select
multiple channels.
• The
Clear All
button can be pressed to deselect all channels.
• Clicking
Cancel
at any time will discard all changes.
Ctrl
⇧
Shift
Fig 6-29: Adding an input group
