6
2
Controls, Indicators and Connections
6
3
Dante Controller
Each of the analogue and digital audio inputs and outputs can be routed in
Dante Controller, to receive/transmit AoIP streams.
For the analogue products, the 0dBFS line-up level is selectable between
+12dBu, +18dBu and +24dBu using the front panel switch. It is a global
se�ng that affects all inputs and outputs.
XLR Line Inputs
The XLR-3 input connectors can take balanced professional levels, or
unbalanced by connec�ng the non-phase to the signal ground.
The line inputs have the following pin-out.
Pin
Func�on
1
Chassis Ground/Screen
2
Input Phase/Posi�ve
3
Input Non-Phase/Nega�ve
XLR Line Outputs
The XLR 3 pin outputs are electronically balanced, and can be wired
unbalanced. Each output is individually buffered so that a short circuit on
one output will not affect the others. The line outputs have the following
pin-out.
Pin
Func�on
1
Chassis Ground/Screen
2
Output Phase/Posi�ve
3
Output Non-Phase/Nega�ve
Ethernet Dante
®
Connection(s)
On the right hand side of the rear panel is either a single Ethernet/PoE
connec�on (AVN-AIO4, AVN-AIO8, AVN-AI16, AVN-AO16, AVN-AESIO8) or
dual redundant Ethernet/PoE connec�ons (AVN-AIO8R, AVN-AI16R, AVN-
AO16R, AVN-AESIO8R).
The Ethernet connec�ons provide PoE and networking capability. There are
two status LEDs on the connector. The le� LED indicates the link speed, the
right indicates link ac�vity.
The LED on the right indicates traffic on the connec�on. When the LED is
flashing orange, data is being transmi�ed/received.
Fig 2-14: Ethernet/PoE Connec�on
(AIO4/AIO8/AI16/AO16/AESIO8)
Fig 2-15: Ethernet/PoE Connec�ons
(AIO8R/AI16R/AO16R/AESIO8R)
Le� LED
Link Speed
Off
Orange
100Mbps
1Gbps
