SonicWALL NSA E7500, Руководство по началу работы

Страница: 25 / 43

Page 24 If the SonicWALL Setup Wizard Does Not Appear
SonicWALL EFT DRAFT
If the SonicWALL Setup Wizard Does Not Appear
If you cannot connect to the SonicWALL NSA E7500 or the Setup Wizard
does not display, verify the following configurations:
•
Did you correctly enter the SonicWALL NSA E7500 management IP
address in your Web browser?
• Are the Local Area Connection settings on your computer set to use
DHCP or set to a static IP address on the 192.168.168.x/24 subnet?
For instructions on changing your Local Area Connection settings, see
Appendix A: Configuring DHCP IP Addressing , on page 31.
• Do you have the Ethernet cable connected to your computer and to the
X0 ( LAN ) port on your SonicWALL NSA E7500?
• Is the connector clip on your network cable properly seated in the port
of the security appliance?
• Some browsers may not launch the Setup Wizard automatically. In
this case:
•
Log into SonicWALL NSA E7500 using “ admin ” as the user name
and “ password ” as the password.
• Click the Wizards button on the System > Status page.
• Select Setup Wizard and click next to launch the Setup Wizard.
• Some pop-up blockers may prevent the launch of the Setup Wizard.
You can temporarily disable your pop-up blocker, or add the
management IP address of your SonicWALL (192.168.168.168 by
default) to your pop-up blocker's allow list.