SonicWALL 10-Port Series, Быстрый старт

Страница: 26 / 36

26
SonicWall Switch Quick Start Guide
3 Ensure that no water or excessive moisture can enter the unit.
4 Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1 inch
(26mm) clearance is recommended.
5 Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters,
and broadband amplifiers.
6 Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º
C) is recommended.
7 If installed in a closed or multi-rack assembly, the operating ambient temperature of the rack environment may be
greater than the room ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum recommended ambient temperature.
8 Mount the SonicWall appliances evenly in the rack in order to prevent a hazardous condition caused by uneven
mechanical loading.
9 Four mounting screws, compatible with the rack design, must be used and hand-tightened to ensure secure
installation. Choose a mounting location where all four mounting holes line up with those of the mounting bars of
the 19-inch rack mount cabinet.
10 A suitably rated and approved branch circuit breaker shall be provided as part of the building installation. Follow
local code when purchasing materials or components.
11 Consideration must be given to the connection of the equipment to the supply circuit. Appropriate consideration of
equipment nameplate ratings must be used when addressing this concern. Do not overload the circuit.
12 Reliable grounding of rack-mounted equipment must be maintained. Particular attention must be given to power
supply connections other than direct connections to the branch circuits, such as power strips.
13 The included power cord is approved for use only in specific countries or regions. Before using a power cord, verify
that it is rated and approved for use in your location.