1.
Attach the required nozzle.
2.
Pull out the power cord to the required length
,
and plug into outlet
.
3.
To switch the vacuum cleaner on, press the
ON/OFF button
[A]
with your foot.
4.
Set the required suction power by rotating the
variable suction knob
[B]
.
Warning!
a
After
Vacuuming
Warning!
Always check the appliance before each use.
A
faulty appliance may cause injury and
should not be
used.
Using the Vacuum
Vacuuming
acuuming
1.
Press the ON
/
OFF button
[
A
]
with your foot to
turn
off the vacuum cleaner.
2.
Unplug the power cord from the power outlet.
3.
Press the cord rewind button
[C]
to reel in the
c
ord
. Gently guide the c
ord
with your hand until
the c
ord
has been completely
retracted
.
4.
The tube and hose can also be stored/parked
with the vacuum in its upright position.
Insert the
floor nozzle clip into the nozzle holder
[D]
.
A
B
C
A
B
C
D
The suction control knob
[B]
will illuminate in RED when:
1
.
The filter bag is full and needs to be replaced
.
2
. The ULPA exhaust filter and/or motor protection filter needs to be replaced.
3
. There is a clog in the vacuum body, hose, tube or floor attachment.
Indicator Lights
9
