Sonic Blue ReplayTV 5500, Руководство пользователя

Страница: 29 / 84

23
C
o
n
n
e
cti
o
n
s
G
e
tti
n
g
St
a
rt
e
d
Se
tu
p
Ba
si
c
Op
e
ra
ti
o
ns
Ad
v
a
n
c
e
d
Fe
a
tu
re
s
Hel
p
System Information
View the system information for your ReplayTV. This information includes:
•
the version of software your ReplayTV is using
• the Serial Number of your ReplayTV
• video setup, including IR blaster code and channel lineup
• phone number your ReplayTV uses for dialing the ReplayTV Service
• IP address
• MAC address
:: Remote Control Setup
Follow these steps to program the remote control to operate your television, TV/VCR combo or TV/DVD combo. When pro-
grammed, the ReplayTV remote will control your TV’s power and volume.
1 Press and hold the Mute and TV (Power) buttons until the LED blinks twice.
2 Enter the 4-digit code for your brand of television (see codes on pages 26-28).
• For example, for Sony, press Mute and TV (Power) simultaneously, and then press 0-0-0-0.
• If a valid code has been entered, the LED at the top of the remote will blink twice.
• If an invalid code has been entered, there will be one long blink and the remote will revert to the previously programmed code.
3 To test the code, press the TV (Power) button on the remote control.
• If your TV turns on/off, programming is complete.
• If your TV does not turn on/off, try another code for your brand of television. Not all TVs can be programmed.
• To clear all settings, press Mute + TV(Power), then press 9-8-1.
ReplayTV5.5 UG.book Page 23 Friday, August 1, 2003 10:58 AM