SonarPhone SP100, Руководство пользователя

Страница: 33 / 38

successful. Turn it on again. Now the name and password will be
back to factory default: 12345678 .
* Quick Touch Models
: Note: Some models of SP200 may have an “instant
on” button to turn your system. You still need to hold down the
button 5 seconds to turn off your SP200 and models with the instant
on power button will not power down automatically when not used,
so be sure to turn off your SP200 when you are done fishing.
SP200/SP300 WiFi Portable WiFi Sonar System
(SP300)
The SonarPhone SP300 Portable System includes a convenient carrying
case system in which the SP300 is mounted to. It contains a
rechargeable 12 Volt battery and a suction cup style transducer
mounting system. This allows you to use SonarPhone on a boat,
without the need for the installation steps. A suction cup attaches
the transducer to the boat.
Attaching the Suction Cup Transducer
1.
Unwind the cable from the carrying case and set the transducer system near the
back of the boat.
2.
Find a smooth spot on the outside and near the bottom of the transom. Try to find
a place where the water flow will be smooth when the boat is going fast. You want
to avoid ribs, rivets, and gouges or scratches in the hull. These create turbulence
in the water and can scatter SonarPhone readings at high speeds.
3.
Wet the face of the suction cup slightly, then press it firmly against the transom
of the boat. Slide it into the best position you can see.