SonarPhone SP100, Руководство пользователя

Страница: 24 / 38

1.
Align the plug of the charging cable with the pins on the bottom of the SP100 as
in the following picture.
2.
Align the USB plug of the charge cable (the longer of the two cables) with the
USB socket of the power supply device (computer, adapter, etc.)
3.
When charging starts the red lights inside the unit will remain On. When the battery
is full, the indicator lights will be switch to green.
IMPORTANT
: Be sure all of the connections are DRY, water on the
stainless steel connection can create rust.
Turning SP100 ON
The SP100 WiFi Sonar System will active automatically when
it is immersed in the water. The SP100's internal GREEN
indicator light when it has connected a SonarPhone app
successfully. Once immersed, the internal computer will
begin to start up. Give it a few seconds.
When ready, the SP100 will begin to blink, indicating it
is transmitting the sonar information via radio frequency
(WiFi) for the SonarPhone app to receive. Connect to it's
WiFi signal using your device settings, then return to
the SonarPhone app to connect to the SP100.
You can turn your SP100 on at home and test it's
functionality: