23
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
PORTABLE PARTY SOUND BOX
ILLUMINATED SPEAKERS AND PROJECTION TO THE WALL BEHIND AND THE FLOOR IN FRONT
● spectacular, separately switched LED light effect ● 2x subw 2x tweeters ● wireless BT connection ● music playback from a mobile
device or computer ● MP3 playback from USB/SD device ● MP3 recording to USB/SD device (BT, LINE IN, MIC, FM) ● archive and digitise
old audio materials (cassette, LP, VHS) ● FM radio with blue LED display and automatic tuning ● treble and bass adjustment, megabass and
EQ sound effects ● microphone echo control ● selectable voice announcement (when switching modes) ● 2x KARAOKE microphone inputs
(6.3mm) ● 2x RCA AUX audio inputs (LINE IN) ● built-in battery ● automatic fast charging with LED indicator ● charging status on the display
● long operating time; up to 14 hours when fully charged ● continuous operation from mains or battery ● compact, rugged, portable design
● remote controller power supply: 2x1.5 V (AAA) batteries, not included accessories: remote controller, mains charging cable, audio cable
APPLICATION
This two-way, active bass-reflex sound box is recommended primarily for hobby and party entertainment purposes. The built-in battery allows operation
without mains voltage. The wireless BT connection, or a pair of RCA sockets (LINE IN) and two 6.3mm diameter microphone inputs allow direct
connection of external devices, such as: mobile phone, PC, CD/DVD player, instrument, microphone… The appliance has an FM/BT/USB/SD/MP3
media player. Accessories include a remote controller and mains charging cable.
POWER SUPPLY, CHARGING THE BATTERY
The sound box can be operated from the built-in battery. The battery must be charged before the first use. Connect the supplied power cable to the
sound box (
POWER IN
socket backside), then connect it to the network and leave the sound box switched off. During charging the red LED is lighting on
the display. Stop charging by removing the power cable, if the red LED goes off or the latest after 5 hours. In case of fully depleted battery, the charging
time is approximately 2 hours. This provides approx. 14 hours operation time from internal battery at medium volume. It also depends on the volume
set, the mode selected and the ambient temperature. The test has been done by listening to radio at room temperature. It also can be charged while in
use, but it increases the charging time.
3-way tilt switch on the backside (SWITCH)
Battery Power
OFF / Recharge
AC
operating from the built-in battery
switch off / charging
operating from the mains
●
The battery can be charged in either of the three switch positions! To fully de-energise the unit, turn it OFF and disconnect from the mains.
Otherwise, the battery charger will continue to operate.
●
Battery status indication: in switched on status, on the lower right corner of the display a triple symbol shows the battery status. The number of
signals decreases during depletion.
●
After charging and/or ending use, unplug the adapter from the mains and the device! Keep it connected after full charging only if the device is in
continuous operation. Charging can cause noise in the loudspeakers. When the machine is switched off, the automatic battery charger operates.
Remove the adapter from the network after charging is complete!
●
For sake of extended battery life, keep the battery in charged status even when it is out of use!
●
The used battery is closed, Li-ion type. It does not require maintenance. At the end of its lifetime, it can be replaced by a specialist after removing
the control panel. The cover is fixed with screws.
PUTTING INTO USE
All connections should be done when the system is powered off! The sound box and the device to be connected are also should be in switched-off state!
Make sure that that the wiring and polarity of the connectors are correct. Keep the microphone cable and audio cable away from the power cable! You
have to connect the power adapter firstly to the sound box, then to the power socket.
To switch off, set the backside tilt switch to
Battery Power
position, if you want to use it independently from the mains, from the built-in battery. If the
device is connected to the mains, set the switch to
AC
position and use it like this.
When the switch on the back is turned on, the message “
StandBy
” appears on the display. Now briefly press the
MODE/POWER
button on the top
control panel. You can turn off the unit by pressing and holding this button. The sound box will also turn off automatically if you do not play any audio
signal for approx. 15 minutes. For example, if no external device is connected in BT or LINE mode.
VOLUME CONTROL AND FUNCTION SWITCHING
You can control the volume using the
VOLUME/POWER
knob or the
VOL+/VOL-
buttons on the remote controller. The function to be operated can be
selected by briefly pressing the
MODE/POWER
button (or
MODE
on the remote controller):
BLUE–USB–SD–LINE–FM–BLUE…
Available multimedia functions: wireless BT connection, USB/SD MP3 player, FM radio, use of external microphones (optional), connection of external
devices (LINE IN jacks). The available services may vary depending on the signal source used.
The volume know is electronically controlled; do not turn it fast, as the processing of data may be slow.
