6
6. Wash the inside of the product, the mixing lever, the spring and the plastic cover by hand.
Do not immerse the appliance in any liquid. Wipe the parts dry.
7. Place the base on a solid, flat surface.
8. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation!
CLEANING
Before cleaning, empty the frother and let it cool down.
Cleaning the tank
1. Do not immerse the appliance in water or any other liquid.
2. Do not clean it in a dishwasher.
3. Wash the inside of the product and the plastic cover by hand after each use. Remove the
mixing lever with the spring and wash them. Wipe the parts dry.
4. Do not leg water splash on the outer surface of the appliance; wipe it only using a slightly
damp cloth.
Cleaning the base
1. Before cleaning, disconnect the base from the power supply by pulling out the plug.
2. Do not immerse the base in water or any other liquid.
3. Clean the base with a dry cloth. Do not use aggressive cleaning agents! Do not let water
leak inside the appliance or spill on electrical components.
TROUBLESHOOTING
Error observed
Possible resolution of the error
The appliance does not
heat / froth the milk.
Check the power supply and the power switch.
Make sure that the tank fits firmly on the base.
Overheat protection may have been triggered. Let the device cool
down and you can have the thermal fuse replaced by a specialist.
DISPOSAL
Waste equipment must be collected and disposed separately from household waste
because it may contain components hazardous to the environment or health. Used
or waste equipment may be dropped off free of charge at the point of sale, or at any
distributor which sells equipment of identical nature and function. Dispose of product
at a facility specializing in the collection of electronic waste. By doing so, you will
protect the environment as well as the health of others and yourself. If you have any
questions, contact the local waste management organization. We shall undertake the
tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall
bear any associated costs arising.
