Somnera 67890, Инструкция по эксплуатации

Страница: 17 / 24

15
TROUBLESHOOTING
Problem/Possible Cause Solution
Pillows won’t seal properly, mask is uncomfortable
or causes marks/ Mask or headgear may have
been fitted or adjusted incorrectly Check that the orientation of the mask is
correct. The “S, M, or L” should be oriented so
it is on the top of the mask. Re-fit your mask
according to the fitting instructions. Readjust
the headgear so it is fitted comfortably.
Patient interface is making noises/Air is leaking
at one or several of the components of the system Check that the mask sits within the groove
of the valve properly. Check that the hose is
connected to the valve properly. Check that
the valve is not damaged. Check that the hose
is connected to the Airbox properly. Refit or
reposition your mask. Adjust your headgear.
One or both of the nasal pillows are squashed or
misshapen or the inner wall of the nasal mask or
one or both of the nasal pillows is incorrect Squeeze individual nasal mask or nasal pillow
sides to return it to original shape. If it does not
return to shape or it is damaged replace the
part. Contact your local Somnera dealer.
Headgear is too loose Adjust the headgear straps & VELCRO
®
backstrap.
Component appears damaged or worn Replace the part. Contact your local Somnera
dealer.
Replacement Schedule
Contact your supplier to replace the components of the Somnera System Patient Interface
according to the following replacement schedule, or if any components become cracked, torn,
discolored or damaged in any way:
Item Description Replacement Schedule
1 Mask 90 days
2 Valve 90 days
3 Hose 90 days
4 Headgear 90 days