background image

8

Copyright © 2016 Somfy SAS. All rights reserved.

EN

Images not contractually binding

2.3.7. Adding/Deleting Somfy control points and sensors
With  local control point:
Refer to the corresponding guide

With the Motor head buttons
Press and hold all the three buttons on the motor head until the motorised 
product moves up and down. Then press on the prog button of the control 
points or sensor to add or delete.

2.3.8. Sonesse ULTRA 50 DC RTS «sleeping» mode

This function allows to lock any transmitters orders during 5mn. Motor won’t react to any transmitters commands. 

The «sleeping» mode is 

only possible if the motor is already set.

1) To put the motor into the «sleeping» mode, breafly press 2 times the Stop 

button of the motor head. 
The motorised product moves up and down and the motor head LED blink 2 
times during 5 min.
2)  To put the motor out of the «sleeping» mode, breafly press 2 times the 

Stop button of the motor head. 
The motorised product moves up and down and the motor head LED turns off.
The transmitters orders wil be executed.

2.3.9. Sun function 
For this function, you need a Telis Soliris transmitter.
By default, the Sun function is not active.
1) To activate the Sun function, press the SELECT button on the Telis Soliris 
transmitter, until the shade makes an Up and Down movement.
2) To deactivate the Sun function, press the SELECT button on the Telis Soliris 
transmitter, until the shade an Up and Down movement.

When the intensity of the daylight exceeds the threshold set by the Soliris 
sensor RTS, a CLOSURE order is sent to the shade after 2 min.
The shade goes to the My position or to its down limit,  if no My position has 
been memorized.

When the intensity of the daylight falls below the threshold set by the Soliris 
sensor RTS, the shade goes to the Sun disappearing position or stays at its 
position (My or down limit), if no Sun disappearing position has been memorized.

The Wind function is not compatible with this motor.

OK

x2   

UP

ST

OP

DWN

x3   

UP

ST

OP

DWN

1)

2)

UP

ST

OP

DWN

UP

ST

OP

DWN

5 min

UP

ST

OP

DWN

UP

ST

OP

DWN

5 min

Содержание Sonesse Utra 50 DC

















Отзывы: