SOMFY Sonesse Utra 50 DC, Инструкция по эксплуатации

Страница: 6 / 16

6
Copyright © 2016 Somfy SAS. All rights reserved.
EN
Images not contractually binding
2.3. COMMISSIONING
2.3.1. Start the commissioning process
1) Switch on the power supply.
The Led switches ON.
2) Press the
Up and Down buttons on the RTS control point / Motor head at
the same time: The motorised product moves up and down (fast raising and
lowering), and the commissioning process beging.
The RTS control point is pre-programmed in the motor.
2.3.2. Checking the direction of rotation
1) Press the
Up button on the RTS control point / Motor head :
a) If the motorised product rises (a), the direction of rotation is correct:
Move onto the section entitled “Setting the end limits”.
b) If the motorised product lowers (b), the direction of rotation is
incorrect: Move onto the next step.
2) Press the
my / stop button on the RTS control point / Motor head until
the motorised product moves up and down: The direction of rotation has
been modified.
3) Press the
Up button on the RTS control point / Motor head to check the
direction of rotation.
2.3.3. Setting the end limits
The end limits can be set in any order.
1) Raise the motorised product to the desired position by pressing the
Up
button.
2) Press the
my / stop and Down buttons at the same time until the
motorised product moves.
The upper end limit is memorised.
3) Press the
my / stop button when the motorised product reaches the
desired lowered position. If necessary, adjust the position of the motorised
product using the
Up and Down buttons.
4) Press the
my / stop and Up buttons at the same time until the motorised
product moves.
The lower end limit is memorised. The motorised product rises and stops in the raised position.
2.3.4. Validation of the setting
To confirm the end limits, press the
my / stop button until the motorised
product moves up and down.
The end limits are programmed and the Led switches OFF.
UP
ST
OP
DW
N
UP
ST
OP
DW
N
2 1
a
b
=
=
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
a
b
=
=
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
a
b
=
=
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
1)
2) 3)
1) 2)
3) 4)
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N
UP
ST
OP
DW
N