9
EN
Images not contractually binding
Copyright © 2016-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
3.4. OPERATING WITH A SOMFY SUN SENSOR
Refer to the corresponding guide.
3.5. ADDITIONAL SETTINGS
3.5.1. Modifying the favourite position (my)
1)
Place the motorised product in the desired favourite
position (my).
2)
Press
my
for ≈ 5 seconds until the
motorised
product moves up and down: the desired favourite
position (my) has been programmed.
3.5.2. Deleting the favourite position (my)
1) Press
my
: the motorised product starts to move,
and stops in the favourite position (my).
2) Press
my
again until the motorised product moves:
the favourite position (my) is deleted.
3.5.3. Adding/Deleting Somfy control points and
sensors
Refer to the corresponding guide.
3.6. TIPS AND RECOMMENDATIONS FOR USE
3.6.1. Questions about the Sonesse 50?
If the motorised product still does not work, contact a motorisation and home automation
professional.
3.6.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a motorisation and home automation
professional.
Observations
Possible causes
Solutions
The motorised product
does not operate.
The control point battery is weak.
Check whether the battery is weak and replace
it if necessary.
The motorisation is in thermal protection
mode.
Wait for the motor to cool down.
1)
2)
1)
2)
