6
EN
Images not contractually binding
Copyright © 2016-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
2.3.4. Recording the RTS control point
The motorisation is in programming mode:
-- Quickly press the PROG button on the RTS control
point to be programmed:
→The motorised product moves up and down: this
RTS control point is programmed in the motorisation.
If the motorisation is no longer in programming mode, repeat Step 2.3.1 then perform
Step 2.3.4.
2.3.5. Re-setting the end limits
Readjusting the upper end limit
1) Press the
Λ
button to bring the motorised
product to the end limit to be readjusted.
2) Press the
Λ
and
V
buttons at the same time
until the motorised product moves up and down.
3) Press the
Λ
or
V
button to move the motorised
product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves up and
down.
Readjusting the lower end limit
1) Press the
V
button to bring the motorised
product to the end limit to be readjusted.
2) Press the
Λ
and
V
buttons at the same time
until the motorised product moves up and down.
3) Press the
Λ
or
V
button to move the motorised
product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves up and
down.
PROG.
1)
2)
3)
4)
1)
2)
3)
4)
