8
PL
- Wymiana modułu elektronicznego SLIDYMOOVE - SOMFY
Okablowanie akcesoriów
3
PL
3.1 Fotokomórki
TX
1 2
1 2 3 5
RX
B
U
S
BUS
33
44
▶
Montaż
Po podłączeniu przewodów do fotokomórek
należy:
• włączyć zasilanie napędu,
• uruchomić tryb otwierania i zamykania bramy.
Fotokomórki są rozpoznawane przez
elektroniczny układ sterowania po
zakończeniu tego ruchu.
▶
Działanie z wykorzystaniem
fotokomórek
Jeżeli fotokomórki zostaną zasłonięte podczas
zamykania bramy, brama zatrzyma się i
zacznie się ponownie otwierać.
Żarówka MAXIMUM 10 W - 24 V - Użycie żarówki o mocy powyżej 10 W- 24 V może spowodować
nieprawidłowe działanie zespołu napędowego.
3.2 Pomarańczowe światło
▶
Działanie pomarańczowego światła
Pomarańczowe światło miga, gdy brama jest w
ruchu.
Ze względów bezpieczeństwa czynności te należy wykonywać przy odłączonym zasilaniu.
Zaleca się wykonywanie automatycznego przyuczenia toru przesuwania bramy przed podłączeniem
akcesoriów (fotokomórki, pomarańczowe światło, itd.)
OKABLOWANIE AKCESORIÓW 3
PL
Okablowanie drugiego zestawu fotokomórek nie jest możliwe do wykonania w przypadku tego
zespołu napędowego.