5
EN
- Replacing the SLIDYMOOVE electronic unit - SOMFY
EN
2
Commissioning and standard use
5
EN
2 COMMISSIONING AND STANDARD USE
2.1 Switching the installation on
2.
If the indicator light does not come on or
the number of flashes is not as expected: see
diagnostic (in the installation and operating
guide of the motor).
1.
The indicator flashes (twice).
The motor is switched on and awaiting
auto-programming.
2.2 Programming a 2- or 4-button remote control
1
2
<0,5s
<0,5s
• Position the remote control to
be programmed on the control
electronics target.
• Briefly press the button on the remote control to be
programmed. The “
RADIO” indicator light will come on
then go out when you release the button on the remote
control.
Complete opening is programmed on this button.