Features
•
Includes valve body, pressure balance cartridge, rough-in guide
and mud guard
•
1/2" Universal NPT & direct sweat inlets & outlets
•
5.0 gpm (18.9 l/min) maximum flow rate at 45 psi
•
Single lever design cycles from off through cold to hot
•
Provides temperature regulation and automatic anti-scald
protection
•
One piece cartridge design simplifies installation and
maintenance
•
Adjustable high temperature limit stop to control maximum water
temperature
•
Requires valve trim to complete installation (sold separately).
Material
Codes/Standards
ASME A112.18.1/CSA B125.1
•
Forged De-zincification Resistant Brass body provides long
term reliability and resistance to aggressive water conditions
ASSE 1016/ASME A112.1016/CSA B125.16
Technology
KOHLER
®
Faucet Lifetime Limited
Warranty
•
Pressure-balancing diaphragm technology maintains outlet
temperature /- 3 degrees Fahrenheit during water
pressure fluctuations
See website for detailed warranty information.
Installation
•
Designed for use in standard, back to back and thin wall
installations
•
Valve body features integral mounting locations and symmetrical
valve inlets to simplify installation
•
Cartridge is reversible for installations where hot and cold
supplies are reversed.
•
Rough-in guide designed for both standard and thin wall
installations
•
Installed valve rough-in can be flushed and pressure tested to
150psi max (air or water) without cartridge, using K-10351 Test
Cap
Optional Accessories
K-10350 Deep Rough-In Kit For K-8305 Cartridges
K-10351 Test Cap For K-8300 Series Valve Bodies
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
6-13-2018 17:00
Rite-Temp
®
Valve Body & Cartridge Kit Complete
K-8304-K
