28
Settings
5
29
English
Use
The gate may be kept open with a short
press on the remote control button during
the time delay.
Pressing the remote control button again
causes the gate to close.
■
Operation in automatic mode
In automatic mode, pressing the key on the remote control causes the gate to open. It will
close automatically after the pre-set time delay.
❏
Switching from automatic to sequential mode.
To return to sequential mode (the AUTO LED is on):
• Place the remote control on the crosshairs inscribed on goes off.
• Press the remote control button until the AUTO LED switches off.
> Sequential mode is active.
■
Operating the lighting
The zone lighting comes on each time the gates are activated. They go off automatically 2
minutes after movement has ended.
STOP
■
Operation in sequential mode
●
Complete opening
• Make a long press on the remote
control.
> Both leaves are supposed to open.
A new press (short or long) controls the
closing of the leaves.
●
Pedestrian opening (if program-
med)
• Make a short press on the remote
control.
> Only the overlapping leaf should open.
A new press (short or long) controls the
closing of the leaves.
Automatic mode is now operational.
• Use the remote control (at a normal
distance) to open the gate.
> The gate opens at nominal speed.
3
Once the gate is completely open:
- Wait the length of the desired time delay.
- Make a new press (short or long) on the remote control to order closing.
> Both leaves close almost simultaneously.
> The AUTO LED remains permanently on.
4
SGA6000 gb.qxd 12/02/08 17:54 Page 28
