46
EN
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
Non contractual images.
This drive does not require any maintenance operation.
If no io-homecontrol
®
control point is programmed: contact a home motorisation and automation
professional.
3.1. UP AND DOWN BUTTONS
A
brief
press on
Λ
or
V
causes the roller shutter to move all
the way up or all the way down.
3.2. STOP FUNCTION
The roller shutter is moving.
-
Briefly press the
my
button: the roller shutter stops
automatically.
3.3. FAVOURITE
*
my
+
POSITION
An intermediate position called "favourite position (my)" other than the fully up or fully down
position is programmed by default in the S&SO-RS100
io.
-
Perform 2 complete
Λ
or
V
cycles as far as the upper and lower end limits of the roller shutter
to activate the favourite position.
To modify or delete the favourite
position (my), see
Additional settings
section.
To use the
favourite (my) position:
-
Briefly press
my
: the roller shutter moves and stops in
the favourite position (my).
3.4. OPERATION WITH A SOMFY io-homecontrol
®
SUN SENSOR
*
SUCH AS SUNIS WireFree™
io
+
Refer to the corresponding guide.
3.5. FEEDBACK
The S&SO-RS100
io sends a message a
.
er each order. This information is processed by
the
io-homecontrol
®
two-way control points.
3.6. ADDITIONAL SETTINGS
3.6.1. Modification of the favourite position (my)
1)
Set the roller shutter to the desired favourite position
(my).
2)
Press
my,
for
≈
5 s
, until there is back and forth
movement by the roller shutter: the desired favourite
position (my) is now programmed.
3.6.2. Deleting the favourite position (my)
1)
Press
my
: the roller shutter moves and stops at
the
favourite position (my).
2)
Press
my
again until the roller shutter moves:
the
favourite position (my) is deleted.
3.6.3. Adding/Deleting Somfy io-homecontrol
®
control points and sensors
Refer to the corresponding guide.
my
my
1)
2)
my
my
1)
2)
my
my
3. OPERATION AND MAINTENANCE
