EN
LEVIXO 30/50 230V RTS
2
Copyright
©
2017 SOMFY ACTIVITES SA. All rights reserved.
1. SAFETY INSTRUCTIONS
DANGER
The motorisation must be installed and adjusted by a pro-
fessional motorisation and home automation installer, in
compliance with the regulations of the country in which it
is to be used.
Failure to follow these instructions may result in serious in-
jury, e.g. due to crushing by the barrier.
1.1. Caution - Important safety instructions
WARNING
For reasons of personal safety, it is important to follow all
the instructions, as incorrect installation can lead to serious
injury. Retain these instructions.
The installer must train all users to ensure the motorisation
is used in complete safety.
The user manual must be given to the end user. The installer
must explain clearly to the user that installation, adjustment
and maintenance of the motorisation must be performed by
a professional motorisation and home automation installer.
1.2. Introduction
1.2.1. Important information
This product is a motorised barrier intended for residential and
collective use as defined in standard EN 12453, with which it is
compliant. The main purpose of these instructions is to satisfy the
requirements of the aforementioned standard and to ensure the
safety of equipment and persons.
TRANSLATED VERSION OF THE MANUAL
CONTENTS
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
1. Safety instructions
2
1.1. Caution - Important safety instructions
2
1.2. Introduction
2
1.3. Preliminary checks
3
1.4. Electrical installation
3
1.5. Handling precautions
3
1.6. Clothing precautions
3
1.7. Safety instructions relating to installation
3
1.8. Safety instructions relating to use
3
1.9. Safety instructions relating to maintenance
4
1.10. About the batteries
4
1.11. Recycling and disposal
4
1.12. Regulations
4
1.13. Assistance
4
2. Product description
4
2.1. Scope of application
4
2.2. Dimensions - Fig. 1
4
2.3. Composition of the kit
4
2.4. Standard installation - Fig. 2
4
2.5. Description of the circuit board - Fig. 3
5
3. Installation
5
3.1. Preparing the base
5
3.2. Mounting the housing - Fig. 6
5
3.3. Identifying the barrier’s mounting direction - Fig. 7
5
3.4. Mounting on the right (opposite of factory mounting) - Fig. 8
5
3.5. Mounting the boom - Fig. 9
6
3.6. Fitting the rubber edge (optional) - Fig. 11
6
3.7. Setting the end limits
6
3.8. Balancing the boom - Fig. 14
6
3.9. Connection to the power supply - Fig. 15
6
4. Quick commissioning
6
4.1. Memorising the remote controls
6
4.2. To be checked always before use
7
5. Use
7
5.1. Standard use of the remote controls - Fig. 18
7
5.2. Locking/unlocking the boom - Fig. 19
7
5.3. Operation of the photoelectric cells
7
5.4. Operation of the safety edge
7
5.5. User training
7
6. Connecting additional devices
7
6.1. General wiring diagram - Fig. 20
7
6.2. Description of the various additional devices
7
7. Advanced parameter setting
7
7.1. Motor direction of rotation - Dipswitch 3
7
7.2. Auxiliary output - Dipswitch 4
7
7.3. Lighting time delay - Dipswitch 5
8
7.4. Wire input operating modes - Dipswitch 6
8
7.5. Operating modes - Dipswitches 7 to 9
8
7.6. Safety edge autotest - Dipswitch 10
8
7.7. Orange light warning - Dipswitch 11
8
7.8. Cell autotest when closing - Dipswitch 12
8
7.9. Setting the closing time delay - Fig. 30
8
8. Programming the remote controls
9
8.1. Memorising 2- or 4-button remote controls to control the auxiliary output -
Fig. 31
9
8.2. Clearing the remote controls - Fig. 32
9
9. Troubleshooting the safety edge
9
10. Technical data
9
