SOMFY KEASY L+, Руководство пользователя

Страница: 20 / 235

19
Accessories for increased ease of operation
Accessories for special installation conditions
* Additional guide arm required (order no. 9 000 002)
Manufacturer’s declaration
(See page 230)
The manufacturer SOMFY GmbH, Felix-Wankel-Strasse 50, D-72108 Rottenburg a. N., hereby declares:
The door opener, type KEASY L+, KEASY XL+, conforms to the 99/5/EG, 98/37 EG machine directive
in accordance with DIN EN 12453:2001, DIN EN 60335-1:1995, E DIN EN 60335-2-95:2001.
Note:
It is prohibited to commission the door equipment, in which this door opener is to be installed, until it has
been established that the door equipment conforms to the regulations of the directive 98/37/EG.
Rottenburg, 16.02.2004
Design Center Manager
p.p. Dieter Thomas
SOMFY pos. no. Remarks
Key-operated pushbutton
surface/flush-mounted 9 000 021
Internal pushbutton 9 000 008
Code pushbutton 9 000 028
2-channel handheld
transmitter, light-grey 1 800 037 433.42 MHz
4-channel handheld
transmitter, Fun 1 800 035 433.42 MHz
4-channel handheld
transmitter, dark-grey 1 800 029 433.42 MHz
SOMFY pos. no. Remarks
Ceiling connection (bracket) 9 000 034 For connection up to max. 270 mm.
Perforated rail for suspending
the garage door opener 9 000 001 Total length 1 m, for connection up to
400 mm.
Ceiling connection (telescope) 9 000 042 For connection up to max. 1.500 mm.
Guide arm extension 9 000 006* For use with wide lintel (up to max. 400 mm)
if the guide arm is on the lintel.
Extension rod 9 000 005* Required if the distance between the upper
edge of the door and the garage ceiling is
too small and if the garage door opener is
installed at the very rear (up to max. 2.5 m).
Wing door mounting 9 000 009 Door wing width max. 1.5 m per wing.
For additional information see “Application”.
Sectional door mounting 9 000 016 For door segments between 300 and
500 mm in height.
Mounting bracket 9 000 040 For reinforcing the upper sectional door
segment.
Curved guide arm 9 000 023 For sectional doors if the supporting rail and
mounting rail are not required on the door
segment.
Lifting arm 9 000 015 For up-and-over doors with vertical running
rails.
Rail extension set 9 000 031 By max. 700 mm.