21
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
-
Replace the Situo front panel:
Insert the mounting lugs in their
-
notches.
Press the lower section until it clicks,
-
to fix the front cover in its bracket.
6.6 Telis 1 RTS/Telis Soliris
RTS remote controls
The Telis 1 RTS has one indicator light
(5a) and the Telis Soliris RTS has two
indicator lights (5b).
If the original remote control has more
than two indicator lights, refer to the
section "Telis 4 RTS/Telis 4 Soliris RTS
remote controls".
Move close to the product to install the
Telis 4 RTS.
6.6.1 Adding a new Telis 4 RTS
Bring the product to the midway
-
position.
-
Turn the original Telis over: the PROG
button (g) is located on the rear panel.
Press the PROG button (g) with the tip
-
of a pencil until the product moves brie-
fly (or a series of 3 beeps is emitted):
the programming function is activated
for approximately 2 minutes.
Take the new Telis 4 RTS.
-
-
Press the Selection button (E) to light
up the indicator light that corresponds
to the channel to which the product will
be associated.
5a
5b
g
E
