16
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
Press the PROG button (F) on the
-
new Telis 4 RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
4 RTS is stored.
-
Press the Down button on the new Telis
4 RTS:
If the product is lowered, the
-
Telis 1 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
Refitting the front cover:
-
One-touch point with a white and grey front
cover:
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fix the front cover in its bracket.
One-touch point with a white front cover:
Refit the front cover on its bracket
-
6.3 Point with Up/STOP/Down
buttons
Move close to the product to install the
Telis 4 RTS.
6.3.1 Checking the compatibility
-
Bring the product to the midway
position.
Cut off the mains power supply or
-
detach the battery connected to the
motor (eg for a battery operated roller
blind).
Remove the front cover:
-
Gently remove the front cover with a
-
flat, pointed tool (such as a flathead
screwdriver) where the white section
and the grey section join.
Lever it and lift the cover, without
-
using force, to detach the mounting
F
